Mining belt conveyors are generally used in the ambient temperature range of+40 ℃ to -10 ℃. For situations where dust, explosion, and corrosion prevention are required, and when the conveyor belt is reversible, additional measures should be taken. The temperature of the material conveyed by the mining belt conveyor is generally less than 60 ℃. The length and assembly form of the machine can be determined according to user requirements, and the transmission can be either an electric drum or a drive device with a drive frame.

During storage, the temperature inside the warehouse should be maintained between -15 ℃ and+40 ℃, and the relative humidity should be maintained between 50-80%. During storage, the conveyor belt must be placed in rolls and not folded. During the storage period, it should be flipped once every quarter. The running speed of the conveyor belt should not exceed 5.0 meters per second. When transporting materials with large block size and high wear, and using fixed plow type unloading devices, low speed should be used as much as possible. Exceeding the specified speed will affect the service life of the tape.

Characteristics of steel cord conveyor belt: high tensile strength, good impact resistance, long service life, low elongation during use, good groove forming ability, good flexural flexibility, suitable for long-distance, long-distance, and high-speed material transportation. This product is composed of core adhesive, steel wire rope, cover layer, and edge adhesive. Steel cord conveyor belt varieties can be made into tubular shapes according to customer needs. According to the performance of the covering adhesive, it can be divided into ordinary type, flame retardant type, energy-saving type, heat-resistant type, wear-resistant type, cold resistant type, acid alkali resistant type, oil resistant type and other varieties.

Cold adhesive is used for the joint. This joint method is more efficient and economical than mechanical joints, and should have a good joint effect. However, in practice, due to the difficulty in controlling the process conditions and the significant impact of adhesive quality on the joint, it is not very stable. Using cold adhesive to bond is equivalent to 40% -55% of the strength of the conveyor belt itself.